article·2015-01-01

Influence of yield criterion and hardening model on springback simulation for 5052 aluminum sheet

YU Hai-ya

Abstract

To select a suitable material model for springback simulation of the 5052 aluminum sheet,the yielding criteria and hardening models used in the four material models,MAT_36,MAT_122,MAT_125 and MAT_226 adopted by LSDYNA software were analyzed. These four material models were used to simulate the springback of a 5052 aluminum U-shaped part. The stress relief during springback at the corners and walls of U-shaped part was discussed. Springback experiments of the U-shaped part were performed,and the obtained data were compared tothe simulation ones. The results indicated that among the four material models,the model,MAT_226,that includes the Balart89 criterion and Yoshida-Uemori kinematic hardening model has the highest precision of springback simulation.The MAT_122modelconsisting ofthe isotropic hardening and Hill'48yielding criterion gives the lowest precision in springback simulation.Hardening model has greater influence on the precision of springback simulation than the yielding criterion has.
Source: openalex_inverted_index · Quality: baseline

Research context

OpenAlex topics: Metallurgy and Material Forming · Metal Forming Simulation Techniques · Soil, Finite Element Methods

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References

Reference metadata was not supplied for this record.