Friction and wear properties of HM1 steel processed by precision spray forming
Source abstract
Abstract
To improve the wear resistance of HM1 steel,the friction and wear properties of HM1 steel processed by precision spray forming( PSF) were studied by dry friction of reciprocating sliding and the wear mechanisms were analyzed,and the results were compared to the as-casted HM1 steel. The results indicated that the friction coefficient of HM1 steel processed by precision spray forming and precision spray forming with tempering( PSFT) was lower than that of the as-casted material. The wear rate of the PSFTed specimens was lower about 34% than that of the as-casted specimens under the loads of 100 N. While,the wear rate of the PSFTed specimens was lower about 48% than that of the as-casted specimens under the loads of 100 N. SEM morphology of wear scar showed that the mainly wear mechanism of the as-casted specimens under the load of40 N was adhesive wear and the wear mechanism was converted to the coexistence of adhesive wear and abrasive wear with severely oxidation wear under the load of 100 N. While the wear mechanism of the PSFed and PSFTed specimens was mainly abrasive wear with mildly oxidation wear.
Source: openalex_inverted_index · Quality: baseline
Research context
OpenAlex topics: Metal Alloys Wear and Properties · Metal and Thin Film Mechanics · Advanced materials and composites
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References
Reference metadata was not supplied for this record.