article·2002-01-01

Ultrasonic peening improves the fatigue strength of welded joints in a ultra-fine grained steel

Zhang Xiaomu

Abstract

Fatigue strength is one of the most important service properties of a welded joint.Due to the ex-istence of tensile residual stresses and geometrical discontinuity across the weld,fatigue failure normally occurs at the welded joint.Hence it is common for important structure to apply a stress relieving heat treatment after welding.This is,however,prohibited for welded joints in ultra-fine grain ed steels.In this study,ultrasonic treatment of the toes of welds in a ultra-fine grain ed steel was applied to enhance the fa-tigue behavior.Ultrasonic peening was executed to the toes of a butt-welded joint.Fatigue test was carried out on cross-weld specimens.The test results showed that the ultrasonic treatment remarkably shifts the S-N curve to the right.The FAT(fatigue strength at10 6 cycles)was increased by66%.The fatigue life atΔσ=200MPa was extended by58times.The mechanism of fatigue strength improvement by ultrasonic treatment was studied.It is shown that two mechanisms improve the fatigue strength of welded joint by ul-trasonic peening firstly,the decrease of the stress concentration ratio at the toes of welds,and secondly,the building-up of a compressive residual stress at the weld.
Source: openalex_inverted_index · Quality: baseline

Research context

OpenAlex topics: Surface Treatment and Residual Stress · Erosion and Abrasive Machining · Advanced Welding Techniques Analysis

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References

Reference metadata was not supplied for this record.