Analysis of the microstructure of the electron beam brazed joint
Source abstract
Abstract
The electron beam brazing system designed by our lab is used for the brazing of the capillary tube-to-sheet structure of stainless steel.The diffusion of alloy elements and the chemical composition of phases at the filler metal-base metal interface and alloy zones with different welding conditions are investigated using an electron probe microanalyser. The experimental results indicate that tube-to-sheet joints meet the technical standards when welding variables of accelerating voltage 60 kV,beam current 6.5 mA,heating time 37 s and scanning amplitude 0.5 are adopted.With the beam power or power density increasing,the interdiffusion effect of filler metal and tube wall is enhanced,which obviously causes the transition layer to thicken thicker and the tube wall to thin thinner obviously.The alloy elements interdiffusion of the base metal and the filler metal result in the formation of a transitional layer that consists of chromium boride,nickel boride and solid solution.
Source: openalex_inverted_index · Quality: baseline
Research context
OpenAlex topics: Hydrogen embrittlement and corrosion behaviors in metals · Welding Techniques and Residual Stresses · High-Temperature Coating Behaviors
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References
Reference metadata was not supplied for this record.