article·1999-01-01

A new method to improve the heat resistance of the brazing seam

Xiao Liu

Abstract

Ni-Cr-Si-B alloys were often used as filler metal for brazing superalloy components. However, continuous eutectics would form in the brazing seam, which would decrease its remelting temperature and heat resistance .To solve the problem, we used powder metallurgy brazing technology. Results showed that when using this new method, the low melting point eutectics disappeared, and the brazing seam were solution strengthened and second phase strengthened at the same time, which would act together to improve the heat resistance of the brazing seam. For instance, the stress rupture life of the brazing joint for K403 and GH4037 alloy could reach 75% and 95% of that of the base metal respectively. This new method had been used in repairing the turbine blades successfully.
Source: openalex_inverted_index · Quality: baseline

Research context

OpenAlex topics: High Temperature Alloys and Creep · Metallurgy and Material Forming · Microstructure and Mechanical Properties of Steels

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References

Reference metadata was not supplied for this record.