X-ray residual stress analysis in different thickness TiN coatings on high-speed-steel substrates
Source abstract
Abstract
Multi-arc ion plating technique has been used to deposite hard TiN coatings on AISI M2 high speed-steel(HSS) substrates.The thickness of the substrate was 1.0 mm in all the samples,while five thicknesses of the TiN coatings,respectively,3.0,5.0,7.0,9.0 and 11.0 μm were used.X-ray diffraction(XRD) has been used for measuring residual stress on TiN coatings.The stresses along five different directions(Ψ =0°,20.7°,30°,37.8° and 45°) on the coating surface have been measured by recording the peak positions of TiN(220) reflection for each 2θ at different tilt angles Ψ.Regardless of the thickness change of TiN coatings employed on substrate,residual compressive stresses are present in the TiN layers.Furthermore,the results reveal the residual stresses in the TiN layers are high.While the coatings thickness changed from 3μm to 11μm,the residual stresses in the TiN coatings varied from-3.22 to-2.04GPa,the intrinsic stresses varied from-1.32 to-0.14GPa,the thermal stresses varied from-1.86 to-1.75GPa.The residual stresses in TiN coatings shew a nonlinear change with the increasing coatings thickness.When the coatings thickness was about 8.5μm,the residual stresses in TiN coatings reached to the maximum by fitting polynomial.These changes ascribes to the defects in the TiN coatings,such as the micro-holes,cooling liquid drops and micro-cracks near the interface between the coating and the substrate,increase with the increasing TiN coatings thickness,which leads the residual stresses in TiN coatings to release effectively.
Source: openalex_inverted_index · Quality: baseline
Research context
OpenAlex topics: Metal and Thin Film Mechanics · Welding Techniques and Residual Stresses · Metal Alloys Wear and Properties
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References
Reference metadata was not supplied for this record.