Design of choked flow angle of die and distribution of physical field of copper flat line produced by continuous extrusion
Source abstract
Abstract
Based on software Deform-3D,The finite element model( FEM) for big flakiness ratio produced by conform continuous extrusion is established. This paper studies the metal flow at the exit of die and stress field's distribution with a variety of the choked flow angle during the process of conform continuous extrusion. The mean-square deviation of velocity at the exit of die can be gotten by analysis of variance,which is used for obtaining the effect of the choked flow angle on the formed of copper flat line. The results as follows: When choked flow angle of die changed from 3°to 15°,the mean square deviation of metal flow velocity increased at first and then decreased with angle increasing,at the same time,equivalent stress in the area of the choked flow angle and the stress across the extrusion direction at the entrance of die would be also increased. With a certain length of calibrating and under die loading,the choked flow angles at 3°,5°and 15°can make metal flow velocity relatively stable at the die exit. When die damages easily,the choked flow angle of 3° and 15° can not only reduce die loads,but also get copper flat line which have homogeneous plate shape. The result could provide theoretical basis for the study of the continuous extrusion process and the optimization of technical parameters.
Source: openalex_inverted_index · Quality: baseline
Research context
OpenAlex topics: Metallurgy and Material Forming · Metal Forming Simulation Techniques · Microstructure and mechanical properties
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References
Reference metadata was not supplied for this record.