article·2012-01-01

Simulation on solidified microstructure of cast bloom of SCM435 steel

Zhengyou Tang

Abstract

To simulate the solidification structure of bloom continuous casting under different cooling condition,the coefficient of heat transfer was obtained by using inverse calculation for SCM435 casting bloom of 325 mm×280 mm,the solidification process were simulated by using finite element method,and then the temperature field and cooling rate of cross-section during solidification process were obtained.The solidification microstructures were simulated by coupling cellular automaton(CA) with temperature field.The results show that the fine-grain area on surface is large,and the fine-grain nucleates and grows up in casting mold,however the columnar crystal nucleation starts at the end of casting mold.By reducing the number of nucleation,grain density and max section area,and by altering mean radius at different level,the max section area of grains has increased 2.7 times,the optimization ingredients have little influence on the grain density and mean radius,but the non-uniformity of grain sizes increase at the same solidification condition.
Source: openalex_inverted_index · Quality: baseline

Research context

OpenAlex topics: Aluminum Alloy Microstructure Properties · Metallurgy and Material Forming

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References

Reference metadata was not supplied for this record.