Effect of allyl-thiourea on the corrosive behaviour of bulk nanocrystalline ingot iron
Source abstract
Abstract
The inhibitive effect of allyl-thiourea (ATU) on the corrosion behaviors of bulk nanocrystalline and conventional polycrystalline ingot iron (BNⅡ CPⅡ) in dilute HCl solution was tested. Results indicate that BNⅡ is less prone to get corrosive than its coarse grain counterpart in blank 1mol·L HCl at room temperature.When CPⅡ and BNⅡ are immersed for 5 min in the corrosive solution inhibited by ATU,no inductive loop appears at different concentrations. When the time is prolonged,for BNⅡ,a Warburg impedance appears. When the electrodes of the two samples are polarized anodically during the potentiodynamic polarization tests,the phenomenon of desorption lappears at the concentration of 100mg/L,but the variation of the potential Edesbetween is obvious. The inhibition effect of ATU for BNⅡ is limited by comparison with CPⅡ.
Source: openalex_inverted_index · Quality: baseline
Research context
OpenAlex topics: Corrosion Behavior and Inhibition · Electrodeposition and Electroless Coatings · Hydrogen embrittlement and corrosion behaviors in metals
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References
Reference metadata was not supplied for this record.