Microstructure of Ti_3Al intermetallic matrix compositesproduced by in-situ reaction
Source abstract
Abstract
Ti 3Al intermetallic matrix composites were prepared using a XD (exothermol deposition) method. The experimental results of composites obtained by XRD, OM, SEM techniques, and electron probe microanalysis indicate that in Ti-17Al-0.5C composite the matrix and the reinforcement are Ti 3Al and Ti 3AlC phases respectively, and the reinforcement has an orientation relationship with the matrix. However, in Ti-17Al-1.5 (2.0) C composites the matrix is Ti 3Al, and the reinforcement is TiC coated with a Ti 3AlC layer. With increasing C content, morphology of reinforcement changes from undeveloped dendrite to equiaxial dendrite. The microhardness and the elastic modulus of reinforcement and matrix were tested by MPM. The measured results show that the microhardness and the elastic modulus of TiC and Ti 3AlC are higher than that of the matrix Ti 3Al. The microhardness and the elastic modulus of reinforcement and matrix have little variation with increasing C content.
Source: openalex_inverted_index · Quality: baseline
Research context
OpenAlex topics: Intermetallics and Advanced Alloy Properties · Aluminum Alloys Composites Properties · Titanium Alloys Microstructure and Properties
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References
Reference metadata was not supplied for this record.