article·2006-01-01

Structure and hardness of a low-alloy high carbon steel with multi-elements during heat treatment

Tao Yu

Abstract

The structure and hardness of a low - alloy high carbon steel (0. 81C,0. 65Cr,0. 89W,0. 54Mo, 0. 23V) during heat treatment are studied in this paper . The results show that there are multiple types of carbides M3 C, M7 C3, M23 C6, M6 C and MC in the steel after annealing. Nucleation and growing of new carbides, dissolution of previous partial carbides during annealing process in g phase region, all these result in ultra - fine distribution. Average size of annealed carbide in the steel is 0.33 -0.34 mm at 800 -840 ℃. Because M3C and M23 C6 dissolve easily in austenite, the higher hardness HRC63 - 65 can be obtained at 840 - 860 ℃. Undis-solved carbide in the steel is propitious to martensite thinning during quenching process and its quantity is little, so quenching optimal temperature is lower than 880 ℃. The good temper - resistance for the steel is obtained and the retained austenite is dispelled effectively at low and middle temperature. The structure of the steel during heat treatment can be described accurately by calculating based on phase equilibrium thermodynamic.
Source: openalex_inverted_index · Quality: baseline

Research context

OpenAlex topics: Microstructure and Mechanical Properties of Steels · Metal Alloys Wear and Properties · Metallurgy and Material Forming

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References

Reference metadata was not supplied for this record.