Effect of continuous annealing process on microstructure and mechanical properties of 5% Mn ultrafine grain TRIP steel
Source abstract
Abstract
To develop the third generation of automobile steel which has good balance of strength and plasticity,the effect of different annealing temperature and time on microstructure and mechanical properties of0. 1C- 5Mn medium-manganese TRIP steel were investigated on heat treatment system for thin steel Sheet CCT- AY- Ⅱ type. Microstructure of the steel was observed by means of SEM and EBSD. The amount of retained austenite in the steel was determined by X-ray diffraction analysis and its mechanical properties were measured in the laboratory. The results show that the best comprehensive mechanical properties are obtained for the experimental steel annealed at 650 ℃ for 3 min. Its tensile strength is 1 022 MPa,total elongation is19. 3%,and the product of tensile strength and elongation is 20 GPa·%; In the early strain stage,a large amount of retained austenite transforms,and the ultra-fine grains coordination mechanism plays a leading role for plasticity of the experimental steel.
Source: openalex_inverted_index · Quality: baseline
Research context
OpenAlex topics: Microstructure and Mechanical Properties of Steels · Metallurgy and Material Forming · Metal Alloys Wear and Properties
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References
Reference metadata was not supplied for this record.