Effects of process parameters on YSZ coatings prepared by EB-PVD
Source abstract
Abstract
To explore the effects of process parameters on 8YSZ(ZrO2 stabilized by 8mol.% Y2O3) coatings prepared by electron beam physical vapor deposition(EB-PVD),the coatings were prepared and their properties,such as density,surface roughness,preferred orientation were analyzed by means of SEM,AFM and XRD respectively.The analysis results showed that the crystal grains aggregated and the pores reduced as the deposition rate decreased from 750 nm/min to 20 nm/min.At the same time,the coefficient of gas permeation of the coatings dropped from 2.41×10-4 cm4/(N·s) at deposition rate of 750 nm/min to 2.41×10-4 cm4/(N·s)at deposition rate of 20 nm/min.The surface roughness of YSZ coatings reduced as the distance between evaporation source and substrate increased.The crystal orientation of the coatings changed with the angle variation of incoming evaporation particles.When the angle was 30°,the crystal plane of(111) was inclined to parallel to coating surface.The crystal planes of(311) and(420) at an incoming angle of 45° as well as the crystal planes of(220) and(331) at an incoming angle of 45° were inclined to parallel to coating surface.
Source: openalex_inverted_index · Quality: baseline
Research context
OpenAlex topics: Metal and Thin Film Mechanics · High-Temperature Coating Behaviors · Gas Sensing Nanomaterials and Sensors
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References
Reference metadata was not supplied for this record.