Effect of technological parameters on the surface quality during cold crucible continuous casting of Ti6A14V ingots
Source abstract
Abstract
In order to eliminating surface defects of the ingot continuous cast by cold crucible, finding about the rule of technological parameters effect on surface quality, and obtaining crack free ingot, different parameters are researched in this paper based on orthogonal experiments and theoretical analyzing. The results show that; the surface qualities change bad with the increasing of the power or the turns of the coil; the surface qualities change good firstly, and then change bad with the increasing of withdrawal velocity or the height of the primer. The degrees of parameters affecting the surface qualities are different, the coil is the most important one, the power is the second one, the velocity is the third one and the primer is the last. The parameters for casting good surface quality is obtained: the velocity is 5 mm/min, the power is 50 kW, the coil is 3 turns and the primer is 30 mm in height. A billet with good surface quality can be cast under the mentioned conditions.
Source: openalex_inverted_index · Quality: baseline
Research context
OpenAlex topics: Aluminum Alloy Microstructure Properties · Additive Manufacturing Materials and Processes · Additive Manufacturing and 3D Printing Technologies
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References
Reference metadata was not supplied for this record.