article·2012-01-01

Forming defects of axial inner micro-grooved copper tubethrough two-split dies rotary swaging process

Yong Li

Abstract

In this paper,the two-split dies rotary swaging experiments of axial inner micro-grooved copper tube(AIGCT) are carried out to study the relation of forming defects and feeding rate with two types of cross-sections(denoted as Ⅰand Ⅱ) and three material states(denoted as A,B and C) of the tube.The result shows that,the maximum elongation ratio of the A-state AIGCT during rotary swaging may be more than 20%,and it decreases with the increase of feeding rate.It is found that wing can occur on the sizing zone of typeⅠ AIGCT in A-state at the feeding rate of more than 21mm/s,and sinking can occur on the sizing zone of typeⅡ AIGCT in A-state at the feeding rate of more than 13mm/s.When the feeding rate is more than 4mm/s and 13mm/s,twisting will occur on the preform of typeⅠ AIGCT in B-state and typeⅡ AIGCT in B-state respectively.It is not advisable to form AIGCT in C-state through two-split dies rotary swaging process due to its obvious twisting and compression.
Source: openalex_inverted_index · Quality: baseline

Research context

OpenAlex topics: Electrodeposition and Electroless Coatings

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References

Reference metadata was not supplied for this record.