article·2013-01-01

Effect of solution treatment on microstructures of 7050 aluminum alloy plates with heavy thickness

Hui Chen

Abstract

To decrease the difference of the properties along the normal direction of 7050 aluminum alloy plates with heavy thickness,the effects of single-step,double-step solution treatment were investigated on the microstructures and mechanical properties of 7050 aluminum alloy plate with thickness of 200 mm comparatively.Optical microscopy,scanning electron microscopy,energy disperse X-ray spectroscopy and tensile test were used to analyze the microstructures and mechanical properties of the plate.The results show that considerably coarse S and Al7Cu2Fe phase particles are observed at 1/4 thickness and core locations of the rolled plate.After single-step solution treatment,most second phase particles are still distributed along the normal direction of the plate,and the tensile strength of the aged plate markedly decreases first and then increases,finally decreases again.And the lowest strength exhibits at 1/4 layer of the plate.After double-step solution treatment,most AlZnMgCu and S phases are dissolved,the volume fraction of the second phase particles decreases significantly at the 1/4 thick layer from 2.45% to 0.51%,and compared with single-step solution treatment,the tensile strength increases to 561 MPa by 12.5% and the lowest strength exhibits at the core of the plate.Double-step solution treatment not only increases the mechanical properties,but also reduces the difference of the properties along the thickness of the plate.
Source: openalex_inverted_index · Quality: baseline

Research context

OpenAlex topics: Aluminum Alloy Microstructure Properties · Aluminum Alloys Composites Properties · Bauxite Residue and Utilization

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References

Reference metadata was not supplied for this record.