Microstructure and properties of Cu-Fe-based diamond composite ultra thin sawing matrixes during cold pressing sintering
Source abstract
Abstract
To study the mechanism of cold compaction densification and the effect of loading rate on microstructure and mechanical properties,a Cu-Fe-based diamond composite ultra thin sawing matrix was prepared by uniaxial die pressing and hot pressing technology at different loading rate. The raw material was Cu-Fe-based single element mixed powder; the microhardness and microstructure of green,microstructure and mechanical properties of hot pressed matrixes were investigated by microhardness tester,OM,SEM,XRD,universal mechanical tester,and so on. The densification mechanism of green samples and the effects of load rate on the microstructure and mechanical properties of hot pressed matrixes were also studied. The results show that the work hardening of Cu and Ni powders with good deformability occurs at low pressure when the load rate is lower,which causes deformation succession restrained and green densification inhibited. The deformation of powders is insufficient when the loading rate is excessive higher,which causes more elastic after effect and green density decreased. The main phases of matrixes sintered are Fe-Cr、( Fe,Ni) 、Ni-Cr-Fe、Fe、Cr and( Cu,Sn),the tensile strength is the highest at the loading rate of 0.1 mm /min,and there are dimple,cleavage and brittle fracture along with particles.
Source: openalex_inverted_index · Quality: baseline
Research context
OpenAlex topics: Tunneling and Rock Mechanics · Powder Metallurgy Techniques and Materials · Advanced materials and composites
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References
Reference metadata was not supplied for this record.