A study on liquid phase sintering process of hard cladding materials
Source abstract
Abstract
Steel based carbide and steel hardened cladding materials FC -Ⅰ and FC - Ⅱ have been manufactured successfully by liquid sintering process. The surface hardness of FC -Ⅰ and FC -Ⅱ after heat treatment are 6.418 MPa ( HV) and 5. 580 MPa ( HV). Sintering parameters obtained by studying the liquid phase sintering process are as follows: sintering temperature of FC -Ⅰ and FC - Ⅱ are 1300 ℃ and 1280 ℃ respectively, temperature raising rate of solid phase sintering and liquid phase sintering are 10 - 15 ℃/min and 5 ℃/min respectively, isothermal holding time is 20 - 60 min. Microstructure of FC -Ⅰ and FC - Ⅱ has been studied using SEM and XRD. Results show that the main composition of the cladding layer of FC -Ⅰ and FC -Ⅱ areα -Fe3 Fe3W3C and Ni based solid solution, Fe3W3C and α -Fe respectively.
Source: openalex_inverted_index · Quality: baseline
Research context
OpenAlex topics: Advanced materials and composites · Powder Metallurgy Techniques and Materials · Injection Molding Process and Properties
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References
Reference metadata was not supplied for this record.