article·2008-01-01

Effect of gamma irradiation on water absorption and mechanical properties of PA6/PTFE blends

Hua‐Ming Xiao

Abstract

In order to investigate the influence of radiation on water absorption and mechanical properties of blends with PA6 matrix,PA6/PTFE blends with varying PTFE contents from 3 wt% to 15 wt% were prepared and irradiated by 60Co γ-ray at ambient conditions up to 100 kGy.Water absorptivity measurement,quasi-static tension and bending tests,and U-notched Charpy impact tests were conducted to evaluat the irradiation-induced changes in water absorption and mechanical properties of the blends.It is shown that the exposure to 60Co γ-ray radiation improves the tensile modulus,tensile strength and flexural modulus of the blends due to partial cross-linking,while the Charpy impact strength and water absorptivity decrease with the irradiation dose.The effect of absorbed water on the impact behavior of PA6/PTFE blends depends on the PTFE content,the absorbed water restrains the impact strength reduction of the blends with lower PTFE content,while it plays a reverse role when the PTFE content exceeds about 7%.Moreover,the water absorptivity of PA6/PTFE blends decreases with the increasing PTFE content,while the flexural modulus initially increases to a maximum value and then decreases with further increase of the PTFE content.
Source: openalex_inverted_index · Quality: baseline

Research context

OpenAlex topics: Tribology and Wear Analysis · Structural Behavior of Reinforced Concrete · Polymer Nanocomposite Synthesis and Irradiation

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References

Reference metadata was not supplied for this record.