Mechanism of Si in the high silicon martensitic hot working die steel
Source abstract
Abstract
A high silicon martensitic hot work steel SDH3 was prepared to study the effect of silicon in the high silicon martensitic hot work steel.The microstructure and alloy element portioning in steel SDH3 was studied by transmission electron microscopy(TEM) and three-dimensional atom probe(3DAP),respectively.The experiment results show that an appropriate increase of silicon in the steel can efficiently increase the volume of retained austenite and make it more stable at higher temperature.The retained austenite has noticeable effect on refining martensite laths,which enhances the strength and toughness of steel SDH3.Silicon precipitates around carbide grains during temper,which consequently decreases the diffusion rate of carbon in ferrite,and as a result it effectively retards the growth and coarsening of carbide precipitations and improves the stability of steel SDH3.Moreover,Silicon decreases the critical depositing activation energy and increases the critical diffusing activation energy of carbon,which makes the carbides easier to deposit in advance from the interstice of α-Fe,but more difficult to coarsen during temper stage.It is also helpful to the stability of the steel.
Source: openalex_inverted_index · Quality: baseline
Research context
OpenAlex topics: Microstructure and Mechanical Properties of Steels · Advanced Materials Characterization Techniques · Metal Alloys Wear and Properties
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References
Reference metadata was not supplied for this record.