Effects of milling time on the tensile properties of nickel-based Oxide Dispersion Strengthened alloy
Source abstract
Abstract
The effect of milling time on the mechanical alloying(MA) and tensile properties of the nickel-based oxide dispersion strengthened(ODS) alloy ws studied,strengthened by oxide dispersions(yttria particles) was studied.The nickel-based ODS alloys were prepared by MA process and subsequent hot pressing.The nickel-based ODS alloy powders were milled in a planetary mill.The effect of milling time on the morphology and phase of the mixed nickel-based ODS alloy powders was investigated by using scanning electronic microscope(SEM) and X-Ray diffraction(XRD).The results indicated that the size of the mixed particles,resulting from mixing nickel-based ODS alloy powders,increased with the increasing milling time.However,the size of the mixed particles reached the maximum after milling for 8 h,then the size of the mixed particles decreased with the increasing milling time.The granularity of the nickel-based ODS alloy powders became stable and homogeneous when the milling time reached 28 h.The tensile results indicated that the nickel-based ODS alloy,fabricated with the mixed particles milled for 28 h,exhibited a highest ultimate tensile strength of 1300 MPa.
Source: openalex_inverted_index · Quality: baseline
Research context
OpenAlex topics: High-Temperature Coating Behaviors · Metal and Thin Film Mechanics · Advanced materials and composites
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References
Reference metadata was not supplied for this record.