article·2012-01-01

Burn-through failure mechanism of in-service welding of pipeline

Wei Liu

Abstract

In-service welding burn-through instability was studied by using pressure pipeline in-service welding burn-through simulation device.By observing the burn macro-morphology,measuring the size of burn instability pool and,observing and analyzing the surface and cross-section microscopic morphology of instability joint through SEM,the burn instability mechanism was investigated.The result shows that,when conducting in-service welding under the condition of the outward convex deformation and the pressure water media,burn morphology is a cavity at the front high tempreture zone of pool.When the heat input is increased,the grain size of HAZ become coarse.The intercrystalline zone was oxidated and the intercrystalline construct was destroyed,which lead to cracks extending along the intercrystalline under the influence of stress and the decrease of strength of pipeline.When the residual strength of the pipeline was not enough to stand the pressure in the internal pipeline,the burn-through occurred.
Source: openalex_inverted_index · Quality: baseline

Research context

OpenAlex topics: Structural Integrity and Reliability Analysis · Mechanical stress and fatigue analysis · Fatigue and fracture mechanics

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References

Reference metadata was not supplied for this record.