article·2014-01-01

Effect of cold pressure on microstructure and properties of cold pressing sintered Fe-based diamond composite ultra thin sawing matrixes

Dong Hongfen

Abstract

To reduce the thickness and enhance the strength of metal based diamond ultra thin sawing,Febased diamond composite ultra thin sawing matrixes with mean thickness of 0. 21 mm were prepared by cold compaction sintering in different cold pressure. The raw material was Fe-based mixed powder,and the microhardness of loose powder and green,microstructure of green,microstructure and mechanical properties of sintering matrixes were investigated by microhardness tester,OM,SEM,XRD,universal mechanical tester. The densification mechanism of green and effect of cold pressure on the microstructure and mechanical properties of hot pressed matrixes were also studied. The results showed that the phenomena of work hardening occurred in Cu and Fe powders of green below 205 MPa,the deformation rate of Cu powder was faster than that of Fe,and the Cu and Fe powders were gathered and cold welding,which prevented the densification of green. The Cu and Fe powders deformed a lot over 205 MPa,and the microstructure of green was compact and the density was increased. The main phases of hot pressed matrixes were( Fe,Ni),Fe1. 3Sn,Cu40. 5Sn11, Cu81Sn22and Fe. The fracture morphology of hot pressed matrixes were dimple,cleavage,and brittleness along with iron rich,and the mechanical properties of hot pressed matrixes at 168 MPa was the best.
Source: openalex_inverted_index · Quality: baseline

Research context

OpenAlex topics: Tunneling and Rock Mechanics · Advanced materials and composites · Powder Metallurgy Techniques and Materials

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References

Reference metadata was not supplied for this record.