article·2014-01-01

Multi-objective optimization of injection molding process parameters based on statistical improvement criterion

Tan Shua

Abstract

To improve the shrinkage and evenness of the production of injection molded slab,this article introduces an iterative multi-objective optimization method based on Kriging surrogate model to find the Pareto set of the optimization problem. The idea of the iterative optimization method is first to establish two approximation function relationships between those index and process parameters by a small size of design of experiment( DOE) with surrogate model to alleviate the expensive computational expense in the optimization iterations. And then statistical improvement criterion of Pareto front is used to provide direction in which additional training samples could be added to better the surrogate model. This process will loop and bring the optimization result close to the ideal Pareto front. Simulation results show that a much better shrinkage quality of molded part can be achieved with the proposed method with smaller amount of samples compared with traditional modeling and optimization method. For rectangular HDPE products,good evenness can be gotten using linear decreasing pressure curve after a period of constant value,and good shrinkage can be gotten using holding pressure with upper limits.
Source: openalex_inverted_index · Quality: baseline

Research context

OpenAlex topics: Injection Molding Process and Properties · Manufacturing Process and Optimization · Additive Manufacturing and 3D Printing Technologies

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References

Reference metadata was not supplied for this record.