Microstructure of laser clad(WC+W_2C)_p/Ni based alloy composite coatings
Source abstract
Abstract
Microstructure of laser clad Co covered(WC+W 2 C)powders/Ni-based alloy composite coatings has been investigated by XRD,SEM and microhardness measurement .Behavior of Co covered(WC+W 2 C) p dur-ing laser cladding has also been analyzed.Results show that Co cover of the(WC+W 2 C) p powders was melt-ed away and mixed with the laser melt,partial dissolution of(WC+W 2 C) p powders also occurred during laser cladding,and the stability of the powders was associated with the W 2 C/WC ratio.While laser melt pool so-lidifies,the(WC+W 2 C) p distribution in the composite coating is primarily controlled by the strong convec-tion in the laser melt pool and the interaction between the powders and the solidification front.Depending on local elemental concentrationsη 1 -M 6 C type(M=Co,W,Ni )carbides with varying compositions form in the coating,preferably on the surface of(WC+W 2 C) p or in close vicinity to them.Solidified microstructure of laser melt differs widely throughout the coating,and the typical microstructure is composed ofη 1 -M 6 C car-bides distributed in a multi-component pseudoeutectic,which predominantly consists ofγ-Ni +M 23 C 6 ,to-gether with borides Ni 4 B 3 ,Ni 3 B,and carbide M 7 C 3 .
Source: openalex_inverted_index · Quality: baseline
Research context
OpenAlex topics: High Entropy Alloys Studies · Metal and Thin Film Mechanics · Advanced materials and composites
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References
Reference metadata was not supplied for this record.