article·2014-01-01

The effect of in-situ alloying on microstructure and properties during the process of TIG welding for MGH956 alloy

Yuchen Lei

Abstract

Tungsten Insert Gas( TIG) welding of ODS alloy MGH956 with two kinds of different filler materials( basic filler and Al- Fe2O3filler) respectively under identical conditions were performed. The chemical composition of the basic filler is similar to that of base metal,while the alloy elements Al,Fe2O3are added to the Al-Fe2O3filler. The effect of in-situ reaction on microstructure and mechanical properties of TIG welding for ODS alloy were studied,and the results showed that the number of pores in the weld reduced significantly, and the size decreased in the TIG welding with the Al-Fe2O3filler. New strengthened phase particles such as Al2O3,TiC and YAlO3were generated,and the reunite tendency of nanometer-sized strengthened phase particles Al-Y composite oxide was reduced. The hardness of the weld improved obviously in the TIG welding with the Al-Fe2O3filler,and the maximum tensile strength of welded joint is 578 MPa,80. 3% of the base metal.
Source: openalex_inverted_index · Quality: baseline

Research context

OpenAlex topics: Welding Techniques and Residual Stresses · Additive Manufacturing Materials and Processes · High-Temperature Coating Behaviors

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References

Reference metadata was not supplied for this record.