article·2015-01-01

Effects of cold rolling reduction before solution treatment on microstructure and property of Cu-Ni-Si-Mg alloy

Zhang Ying-hu

Abstract

In order to optimize the rolling parameters of Cu- Ni- Si- Mg alloy,Optical Microscope( OM),Scanning Electron Microscopy( SEM),Transmission Electron Microscope( TEM),Energy Dispersive Spectrometer( EDS) and X-ray diffraction( XRD) were used to analyze the mechanical properties and tensile fracture morphology of Cu-Ni-Si-Mg alloy with different cold rolling reduction before solution treatment. The results show that the grain size of Cu-Ni-Si-Mg alloy increased,the yield strength,hardness and elongation increased first and then decreased,The tensile strength increased at first,after about 710 MPa fluctuation,then decreased with the increase of rolling reduction; cold reduction increased from 94% to 96%,the grain size increased from12 μm to 52 μm,While the tensile strength changed slightly owning to fine-grain strengthening and aging strengthening of Cu-Ni-Si-Mg alloy plays a leading role at low reduction,while Homogeneous precipitation of second phase particles under high reduction make up for the loss of tensile strength which caused by coarse grains; the tensile fracture morphology of alloy shows dimpled rupture when 93% rolling reduction while mixture mode of dimpled rupture and intergranular brittle fracture is observed when 97% rolling reduction.
Source: openalex_inverted_index · Quality: baseline

Research context

OpenAlex topics: Microstructure and mechanical properties · Aluminum Alloys Composites Properties · Metallurgy and Material Forming

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References

Reference metadata was not supplied for this record.