Finite element numerical simulation on extrusion process of ZK60 magnesium alloy sectional material
Source abstract
Abstract
The extrusion process of ZK60 magnesium alloy sectional material was simulated numerically by using of plastic finite element method on the DEFORM-3D platform. The influences of deformation temperature ( T = 300 ℃ /350 ℃) and rate of deformation ( V = 2 and 5 mm/s) on the equivalent strain,equivalent stress,temperature field and deformation load were analyzed. The results show that,deformation temperature affects equivalent stress evidently,and the maximum equivalent stress decreases from 75 MPa to 55 MPa when the deformation temperature is increased from 300 ℃ to 350 ℃. The rate of deformation affects temperature rise evidently and when extrusion speed increases from 2 mm/s to 5 mm/s,the maximum temperature rise increased from 81 ℃ to 118 ℃. The suitable extrusion temperature is 350 ℃ and the extrusion speed should be below 5 mm/s when the extrusion ratio is 25.
Source: openalex_inverted_index · Quality: baseline
Research context
OpenAlex topics: Magnesium Alloys: Properties and Applications · Aluminum Alloys Composites Properties · Hydrogen Storage and Materials
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References
Reference metadata was not supplied for this record.