article·2015-01-01

Study on surface characteristic of T800H carbon fiber and hygrothermal performance of T800H/BA9918 composite

Wang Yingfe

Abstract

This paper intends to analyze the surface characteristics of T800 H carbon fiber and the interface matching performance between T800 H and BA9918 resin. Scanning electronic microscopy( SEM),atomic force microscopy( AFM),X-ray photoelectron spectroscopy( XPS) and thermogravimetry analysis( TGA) were used to characterize the surface morphology / chemical properties of carbon fibers and the heat resistance of sizing agent. Then,the 0° compression strength,90° tensile strength and interlaminar shear strength( ILSS) of T800 H / BA9918 were tested before and after hygrothermal treatment. Last,the open hole compression and compression after impact performance of T800 H / BA9918 were obtained. Tests found that there are obvious grooves in the surface of T800 H,which benefits the interfacial mechanical engagement between fiber and resin.The compressive strength after a 29 J impact is 314 MPa. In 130 ℃ hygrothermal environment the retention ratio of 0° compression strength and ILSS are above 58% while open hole compression strength are above 60%. Test results demonstrates that T800 H carbon fiber and BA9918 resin have good interface matching performance,and T800 H / BA9918 composite material has good hygrothermal performance.
Source: openalex_inverted_index · Quality: baseline

Research context

OpenAlex topics: Fiber-reinforced polymer composites · Natural Fiber Reinforced Composites · Electrospun Nanofibers in Biomedical Applications

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References

Reference metadata was not supplied for this record.