Experimental and numerical analysis of V-bend and springback of laminated steel sheet
Source abstract
Abstract
This paper aims at studing the effects of mold's fillet radius and punch's maximum force on the V-Bend and springback of laminated steel sheet. Tensile and lap-shear tests were carried out to obtain the mechanical property of each layer in a laminated steel sheet. 90° V-bend and springback of the laminated steel sheet were then simulated based on a three-layer finite element model. Numerical results were compared with experimental data for model validation. The influences of fillet radius and punch displacement on the bending and springback of laminated steel sheet were subsequently analyzed based on finite element simulation. The optimized processing parameters were acquired. It turns out that bent angle after springback nearly linearly declines at most forepart of the curves and then slightly recovers under conditions of different fillet radius of punch. Similar trendency could be acquired if the condition is changed to the maximum force of punch.
Source: openalex_inverted_index · Quality: baseline
Research context
OpenAlex topics: Metal Forming Simulation Techniques · Microstructure and Mechanical Properties of Steels · Mechanical stress and fatigue analysis
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References
Reference metadata was not supplied for this record.