Formation mechanism of sphere-like αphase in near-liquidus casting
Source abstract
Abstract
This paper studied the influence of pouring temperature,casting velocity and cooling intensity on the microstructural evolution of 6061 alloy during near-liquidus semicontinuous casting(LSC) to clarify the formation mechanism of the semisolid microstructure.It was analyzed the formation of spherical primary α phase in melt according to the results of the metallographical measurement and the multi-scale computer simulation.It is experimentally found that the 6061 semisolid alloy with fine spherical primary α phase can be obtained by LSC under the conditions of the pouring temperature 657 ℃ the casting velocity 150 mm/min and the cooling water flux 0.05 m3/min.It is shown from the theoretical analysis and the multi-scale computer simulation that the overlapping solute fields of the adjacent growing grains will improve the stability of the moving solid-liquid interface and the uniformity of the grain growth in all directions,which facilitates the formation of globular primary α phase.The morphology of the primary α phase is determined by the rate of nucleation and that of grain growth in the melt,which can by achieved by adjusting the casting parameters.LSC can provide ideal technical parameters for an appropriate combination of the nucleation and the grain growth to result in the fine semisolid microstructure.
Source: openalex_inverted_index · Quality: baseline
Research context
OpenAlex topics: Aluminum Alloy Microstructure Properties · Solidification and crystal growth phenomena · Aluminum Alloys Composites Properties
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References
Reference metadata was not supplied for this record.