article·2007-01-01

The temperature distribution during the heat-induced transfer process of producing UFG material

Yanrong Wang

Abstract

According to the fundamental of producing ultra fine grain(UFG) material by transferring the friction-pressure-torsion(FPT) severe plastic deformation(SPD) zone along the base metal,a heat-induced transfer process(HITP) was used to prepare a clubbed bulk UFG material.In order to study the thermo-mechanical parameters during the process,the distribution mathematical models of base metal zone,UFG zone,SPD zone along axial direction during HITP were set up with heat conduction theory.The influences of the heat power,cooling degree,and material heat parameters on the temperature distribution were studied.The analysis results show that: the temperature of SPD zone increases with the input power increasing,and decreases with the transferring speed of SPD zone and the cooling degree increasing.The temperature grads at base metal zone is greater than that at UFG zone.The input power has a great influence on the temperature of UFG zone and SPD zone.The cooling degree has a great influence on the temperature grads of UFG zone.The temperature of SPD zone during HITP of 1Cr18Ni9Ti with diameter 11 mm is about 944 ℃.
Source: openalex_inverted_index · Quality: baseline

Research context

OpenAlex topics: Metallurgy and Material Forming · Aluminum Alloys Composites Properties · Powder Metallurgy Techniques and Materials

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References

Reference metadata was not supplied for this record.