Effect of thermal environment of superplastice forming /diffusion bonding on the fatigue properties of Ti- 6Al- 4V alloy
Source abstract
Abstract
The microstructure evolution affected by SPF/DB progress was examined by optical microscopy. The test for rotating bending fatigue limit was carried out at room temperature and in the atmospheric environment.The scanning electron microscopy was used to analyze the rotating bending fatigue fracture. The results indicated that the bimodal microstructure changed into equiaxed microstructure after SPF / DB process. To some extent,the strength decreased with the increase of plasticity,and the rotating bending fatigue limit decreased from the original value 420 MPa to 405 MPa. On the condition that the stress was 431 MPa,the fatigue life decreased from 107to 106. The radial lines near the crack origin zone changed thicker and discontinuous. The separation between fatigue striations in the crack extension zone changed wider,while the crack propagation rate increased after SPF / DB. This was mainly due to the faction of lamellar α decreased obviously caused by thermal environment which reduced the total length of the grain boundary,and the impediment effect of lamellar α on the crack propagation was also decreased.
Source: openalex_inverted_index · Quality: baseline
Research context
OpenAlex topics: Fatigue and fracture mechanics · Metallurgy and Material Forming · Microstructure and Mechanical Properties of Steels
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References
Reference metadata was not supplied for this record.