article·1999-01-01

Processing and microstructure of laser cladded Cu base composite coating on the surface of an Al alloy

Shi Dong

Abstract

In this paper, a Cu base composite coating with high hardness was fabricated by laser cladding the mixed powder (content, wt%:20Ni, 8.0Co, 5.0Fe, 6.8Mo, 1.5Cr, 3.5Si, 0.2RE.,Cu as base) on the surface of Al alloy ZL104. It was found that dilution ratio of the coating decreased with increasing of spot size and scanning speed of the laser beam under a certain laser power, and obviously increased with increasing of laser power while spot size and scanning speed were constant. The power density was critical parameter to be controlled for fabricating ground coatings. The coating had laminar macrostructure. Spherical hard particles, as reinforced phases for the coating, dispersed in the fine dendritic matrix. Spherical hard particles were depleted of Cu but rich of elements such as Mo, Co, Cr, Fe and Si, while the matrix was reverse in composition.
Source: openalex_inverted_index · Quality: baseline

Research context

OpenAlex topics: High Entropy Alloys Studies · Additive Manufacturing Materials and Processes · Surface Treatment and Coatings

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References

Reference metadata was not supplied for this record.