article·2011-01-01

Research of transformation microstructure and mechanical properties of X120 pipeline steel

Qingwu Cai

Abstract

To meet the future needs of efficient oil and gas transportation and the requirement of mechanical properties and weldability of high grade pipeline steel,a test material with the chemical compositions of 0.05%C-2.01%Mn-0.30%Mo-0.48%Ni-0.35%Cu-0.076%Nb-Ti-B was experimentally studied for the development of X120 pipeline steels.The sample was formed in recrystallization and non-recrystallization zone with 30%and 35%reduction respectively and then be cooled in different cooling ratio by means of Gleeble 1500 thermal simulator.The change of transformation temperature,microstructure and Vickers hardness was studied the samples were analyzed by optical microscopy,SEM,micro-vickers hardness tester.After controlled rolled,the test steel billet was controlled cooled with 370~500℃finished cooling temperature and 40~71℃/s cooling ratio.The conclusion is that the microstructure is mainly low carbon martensite and low carbon bainite when the cooling rate is between 20~50℃/s.Meanwhile,the Vickers hardness of steel has also increased with the increasing cooling rate,the highest hardness is HV320.Except the low elongation,the other mechanical properties meet the requirements of X120 pipeline steel standard,after the steel treated by controlled rolling and controlled cooling to≤450℃finished cooling temperature.
Source: openalex_inverted_index · Quality: baseline

Research context

OpenAlex topics: Microstructure and Mechanical Properties of Steels · Metallurgy and Material Forming

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References

Reference metadata was not supplied for this record.