Erosion corrosion of the Ti-Zr-Be-Cu-Co bulk amorphous alloy in NaCl solution
Source abstract
Abstract
The corrosion resistance of Ti based bulk amorphous alloy is important for its future applications in the industry. The erosion corrosion of Ti35Zr30Be2 4Cu7.5Co3.5bulk amorphous alloy and its corresponding crystal with identical compositions was investigated in 6wt.% Na Cl solution by the weight loss method. The fluid velocity is 0.2,0.4 and 0.6 m / s,respectively. The phase structure and the surface morphology of the glassy alloy and its corresponding crystal with identical compositions were analyzed using X-ray diffractometer( XRD)and scanning electron microscope( SEM). The corrosion resistance of the two alloys after the erosion corrosion was characterized by electrochemical potentiodynamic polarization test. The results show that the corrosion rate increased while increasing the flow rate from 0.2 to 0.6 m / s,and the maximum corrosion rate peak time of the Ti35Zr30Be2 4Cu7.5Co3.5bulk amorphous alloy reduced from 32 h to 10 h for static state and 0.6 m / s fluid state,respectively. The corrosion rate of Ti35Zr30Be2 4Cu7.5Co3.5bulk amorphous alloy is smaller than that of its corresponding crystal. The Ti35Zr30Be2 4Cu7.5Co3.5bulk amorphous alloy shows good corrosion resistance in6 wt.% NaCl solution after electrochemical corrosion. The role of Cl-ions and erosion corrosion mechanism were also discussed.
Source: openalex_inverted_index · Quality: baseline
Research context
OpenAlex topics: High-Temperature Coating Behaviors · Metallic Glasses and Amorphous Alloys
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References
Reference metadata was not supplied for this record.