Annealing behavior of low content niobium nano-particle dispersion strengthened copper alloy
Source abstract
Abstract
In order to obtain conductors with high strength,high conductivity and high resistance to softening,the nano-particle dispersion strengthened copper alloy with niobium content of 0.5% was prepared by mechanical alloying,and its annealing characteristics were invesgigated.The results show that the hardness decreases slowly with increasing annealing temperature,which indicates that alloy recovery occurs.With annealing temperature increasing,the alloy relative conductivity increases and reaches its maximum 89%IACS at 400 ℃.However,it decreases with the further increasing annealing temperature,which is mainly caused by the resolution of niobium particles.TEM observation shows that the dislocation density in the cold rolled alloy matrix is very high and decreases with the increasing annealing temperature.As the fine niobium particles are the obstacles to dislocation and grain boundaries motion,the subgrain structure but not recrystal grains is retained in most regions after annealed at 900 ℃.Therefore the alloy has a high softening resistance at elevated temperature.
Source: openalex_inverted_index · Quality: baseline
Research context
OpenAlex topics: Microstructure and mechanical properties · Aluminum Alloys Composites Properties · Copper Interconnects and Reliability
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References
Reference metadata was not supplied for this record.