article·2010-01-01

Detailed observation of change in strain near crack tip under fatigue crack growth

Ying Xiong

Abstract

Determination of the opening/closure load ( P op or P cl) by traditional ASTM2% offset method and unloading compliance method depends on the linear sections of compliance curve,but errors often occur caused by manual operation. This paper focuses on the physical meaning of compliance changes caused by plastic deformation at the crack tip,and the relationship among compliance change,crack opening/closure and elastic-plastic behavior in a load cycle is analyzed. The fatigue test is carried out for structural steel by high-precision local measurement technique,hysteresis loops accurately denoting the elastic-plastic behavior near the crack tip are obtained,and the load at loop′s inflexions is calculated by differential method. Several crack driving force parameters taken from literatures are evaluated based on the test result. It is indicated that KRPG( = Kmax-KRPG ) is more suitable to be a parameter of driving force for crack growth than Kcl( = Kmax-Kcl) and Kop( = Kmax-Kop ).
Source: openalex_inverted_index · Quality: baseline

Research context

OpenAlex topics: Fatigue and fracture mechanics · Structural Health Monitoring Techniques · Engineering Structural Analysis Methods

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References

Reference metadata was not supplied for this record.