article·2006-01-01

Experimental investigation on forge forming process of spray deposited blanks of rapidly solidified AlFeX heat-resistant aluminum alloy

Richu Wang

Abstract

Spray deposited blanks of rapidly solidified AlFeVSi alloy are demanded to compact by using of hot-forge process at 450℃.Deformation capability and forge failure behavior of the as-deposited and as-compacted blanks were studied by forge test in different orientations.The full dense forge pieces of spray deposited Al-9.20Fe-1.37V-2.30Si alloy were fabricated through steel package forge process.Effect of hot-forge deformation on microstructures and mechanical properties of spray deposited AlFeVSi alloy was studied by means of optical microscopy,transmission electron microscopy,scanning electron microscopy and measure of tensile properties.The results show that,spray deposited AlFeVSi alloy blanks can be compacted to realize metallurgical binding state through hot-forge deformation.Single-pass reduction ratio of the hot compacted billets of spray deposited AlFeVSi alloy may be considered as 20-40%.During forge deformation,it is necessary to load the forging force in perpendicular to the original depositing surface of billet,and to add plastic package to limit open deforming of the side-surface.By using steel package forge process,the forge pieces of spray deposited Al-9.20Fe-1.37V-2.30Si alloy with excellent mechanical properties of σ_(0.2)=431MPa,σ_b=462MPa and δ=9.6% at room temperature,and σ_(0.2)=187MPa,σ_b=210MPa and δ=10.2% at high temperature of 350℃ can be obtained in the condition of small compressing deformation.
Source: openalex_inverted_index · Quality: baseline

Research context

OpenAlex topics: Metallurgy and Material Forming · Aluminum Alloy Microstructure Properties · Aluminum Alloys Composites Properties

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References

Reference metadata was not supplied for this record.