article·2014-01-01

The damage mechanism and bending strengh characteristic of T type swallow-tailed slot joint of FRC/steel

Mei Zhiyua

Abstract

The T type swallow-tailed slot joint configuration and the vacuum assisted forming method have been put forward to meet the demands of the water-tight and the strong connection between the steel and FRC. The specimens of the primary configuration with 6 mm laminate and steel slot T type joint has been fabricated,and the tensile and compressive bending tests have been carried out. The results show that the tensile and compressive bending limit load of the joint with 1 mm slot layer and 5 mm upper layer respectively reach1. 6 ~ 1. 8 KN and 2. 6 KN; the failure modes are the initial damage at the contact end of the steel slot and the laminate,the interface delamination of the slot layer and upper layer represented as the connection strength failure of the joint,and the tensile /shear fracture of the filling core. Through the analysis,increasing the thickness of the slot layer is considered as the effectively method to improve the bending strength of the connection structure and reduce the interface stress level. Increasing the tensile /shear strength of the filling core material is an effective way to improve the connection strength of the joint. The experimental results show that the tensile /compressive bending strength of the joint can be increased 1 times with the increase of the thickness of slot layer.
Source: openalex_inverted_index · Quality: baseline

Research context

OpenAlex topics: Metal Forming Simulation Techniques · Structural Load-Bearing Analysis · Metallurgy and Material Forming

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References

Reference metadata was not supplied for this record.