article·2014-01-01

Investigation on sintering processing,structure and property of 316L honeycombs fabricated by extruding

Jiaguo Yu

Abstract

Pure 316 L powder is used to mix with an additive to prepare a powder mixed paste by which the316 L stainless honeycombs are extruded through a die,then dried and sintered at high temperature. The effect of sintering atmosphere and sintering temperature on the microstructure of honeycombs has been studied,and mechanical property is measured by radial compression. The results show that the metal particles sintered in hydrogen atmosphere contact to form sintering neck,and with the temperature increase,the particles merge into a grain,the microstructure of sintering honeycombs is composed of γ- Fe matrix and second phase of spherical particles of low melting point compounds containing silicon. If sintered in vacuum,the oxides of Fe2Cr4O4,Cr2O3,and SiO2 form on the surface of metal particles to stop the combination of metal powder particles,so the honeycomb strength is much lower than that in the hydrogen atmosphere. The strength of 316 L metal honeycomb sintered in hydrogen atmosphere reaches 40 ~ 50 MPa,far higher than that of ceramic honeycomb used current widely. The 316 L metal honeycomb is a kind of ideal material for catalytic carrier.
Source: openalex_inverted_index · Quality: baseline

Research context

OpenAlex topics: Mechanical Failure Analysis and Simulation · Catalytic Processes in Materials Science

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References

Reference metadata was not supplied for this record.