article·2008-01-01

EIS analysis of Mg-Li alloy corrosion in alkaline condition

Chunhong Zhang

Abstract

In order to study the corrosion behavior of Mg-Li alloy in alkaline of NaCl,the electrochemical impedance spectroscopy(EIS) of Mg-Li alloy under several different conditions was detected,fitted and analyzed.The conditions were different pH values in alkaline solution of 0.4 mol/L NaCl,pH=9 and pH=14 in different concentrations of NaCl solution,corrosion for 100 h in different alkaline solutions of NaCl,respectively.The results show that Cl-concentration and pH have obvious effects on the corrosion velocity.Electrochemical reactive resistance decreased with the increase of pH in the same concentration of NaCl solution,and with the increase of Cl-concentration at the same pH.The effects of pH on average corrosion velocity gradually decreased with the increase of Cl-concentration.When Cl-concentration was low and pH was high,high frequency loop and low frequency loop both increased with the increase of corrosion time during the corrosion period from 0 to 100 h.When Clconcentration and pH were both low or Cl-concentration was high,low frequency loop changed obviously,which increased after a reduced process.Average corrosion velocity of the alloy in low Cl-concentration solution was much less than that in high Cl-concentration solution,which was independent of pH when the corrosion time was 100 h.
Source: openalex_inverted_index · Quality: baseline

Research context

OpenAlex topics: Magnesium Alloys: Properties and Applications · Hydrogen Storage and Materials · Corrosion Behavior and Inhibition

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References

Reference metadata was not supplied for this record.