article·2005-01-01

As-cast microstructure and mechanical properties of Ti-N alloys

Hongwei Wang

Abstract

In this paper, titanium matrix composites containing nitrides in which N content ranging from 0. 045wt% to 0. 27wt% were fabricated by using in-situ melting-casting process. The as-cast microstructure and mechanical properties of Ti - N alloys were studied. The results indicate that the morphologies and constitution of nitrides in Ti - N alloys vary significantly with the increasing of N content. When N content ranges from 0. 045wt% to 0. 18wt% , reinforcements in α -Ti matrix are TiN0.3 phase which are fine dendrite and linearly distribute in matrix. In addition, a few thin plates precipitated along grain boundary. When N content increases to 0. 225wt% , reinforcements change into block-like Ti2N and distribute in grains and along grain boundaries. The hardness, compressive strength and elastic modulus of the Ti - N alloys are higher then those of matrices. Furthermore, with the increasing of N content, the hardness, compressive strength and elastic modulus of Ti - N alloys were further increased. When the reinforcement phase transforms from TiN0.3 into Ti2N the compressive strength increases remarkably. On the base of analysis of fractographies, it shows that matrix fracture is ductile. With the increasing of N content, alloy fracture transforms into brittle fracture that has the characteristics of transgranular cleavage.
Source: openalex_inverted_index · Quality: baseline

Research context

OpenAlex topics: Metal and Thin Film Mechanics · Titanium Alloys Microstructure and Properties · Advanced materials and composites

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References

Reference metadata was not supplied for this record.