Effect of particle size mixed on the properties of water-atomized iron powder
Source abstract
Abstract
Different proportions of two kinds(-80+100 mesh and-325 mesh) of water atomized pure iron powder were taken to study the different effect on the apparent density,flowability,compressibility and compression process.The results showed that the apparent density of iron varied in the range of 2.84~3.42 g/cm3 and the flowability in 20~31 s/50 g by controlling the composition of different particle size.Compared to coarse powder,when 25% fine powder was added in the coarse powder,the green density increased at the low pressure(300 MPa) and decreased under high pressure(≥ 300 MPa).When the fine powder's ratio increased to 75%,the green density increased.Further more,the fine powder's ratio increased to 100%,the value of green density is decreased.At low pressure(300 MPa),the mechanism of compact densification is the slippage and rearrangement of particle;Under high pressure(≥ 300 MPa),however,the mechanism of compact densification is the plastic deformation of powder.
Source: openalex_inverted_index · Quality: baseline
Research context
OpenAlex topics: Fluid Dynamics and Heat Transfer · Erosion and Abrasive Machining · Advanced materials and composites
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References
Reference metadata was not supplied for this record.