Effects of the modification with sodium salt and vibration on microstructure and properties of Zn-27A1-Si alloy
Source abstract
Abstract
In order to improve the wear-resistance performance of Zn - Al alloy on the condition of dry friction and to widen its application in industry, the Zn -27Al-Si alloy was prepared by adding 3% -4% silicon to the alloy and then treating it with modifying agent containing sodium and vibration. Through optical microscope and electron microscope the morphology of silicon phase was observed, the mechanical properties of the alloy were tested. The results indicated that sodium adsorbing on the growth sidestep of silicon crystal resulted in primary silicon changed into nodular silicon. On the hand, vibration can alter the temperature field of crystallization and restrain the precipitation of eutectic silicon. On the other hand, vibration can mechanically break up stick-form eutectic silicon that grew radiated on the surface of nodular silicon and decrease the separation of the silicon phase to the alloy matrix. The results of dry friction test showed that the wear-resistance Zn -27Al - Si alloy was increased by 3-4 times.
Source: openalex_inverted_index · Quality: baseline
Research context
OpenAlex topics: Aluminum Alloys Composites Properties · Aluminum Alloy Microstructure Properties
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References
Reference metadata was not supplied for this record.