Deformation of surface layer by shot blasting on oxidation resistance of TP304H steel at elevated temperature in water vapor
Source abstract
Abstract
The oxidation resistance of TP304H steel at 610~770 ℃ in water vapor can be improved with surface deformation. Different intensities of shot blasting (SB) were applied and the results of 65 h corrosion testing were examined using SEM, EDX and EPMA. The experimental data show that shot blasting can reduce the oxidation rate effectively and the best effect is revealed at the blasting intensity of 0.5 MPa with the testing temperature of 730 ℃. Plastic deformation increases the defect densities in the surface layer; dislocations and vacancies would accelerate the nucleation rates of the oxides at the early stage and enhance the changing of plain Fe oxide or Fe-Cr complex oxide to Cr_2O_3. This fact is also associated with the difference of diffusion rates of Cr and Fe in the distorted matrix. The short cut diffusion paths of Cr atoms decrease the critical Cr content of selective oxidation, thus the Cr_2O_3phase can grow to a stable thickness, and retard the enrichment of Fe atoms on the surface of the oxide scale.
Source: openalex_inverted_index · Quality: baseline
Research context
OpenAlex topics: Advanced Measurement and Detection Methods · High-Temperature Coating Behaviors · Welding Techniques and Residual Stresses
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References
Reference metadata was not supplied for this record.