Effect of cooling rate on I-phase formation in as-cast Mg_(68)Zn_(28)Y_4 in-situ composites
Source abstract
Abstract
In Mg68 Zn28 Y4alloys,stable icosahedral quasi crystals(Zn60 Mg30 Y10) were prepared by as-cast method with two different cooling ways.Different cooling rates were analyzed to study the effects on I-phase formation,amounts,distribution and grain size.The microstructure,composition and phases were analyzed by SEM and EDS.The structure of quasi crystal phase was identified by TEM.Results show that the I-phases directly nucleate and grow from the melt of cooling Mg68Zn28Y4 ternary alloys at room temperture.The circular degree and the granularity of the quasi crystalline demonstrate no difference between vertical section and horizontal section in the castiron mould,and I-phases evenly distribute with 10-15 μm grain size.It can be seen that the effect of cooling rates on formation and distribution of quasicrystals in as-cast Mg68Zn28Y4 alloy is not remarkable in the conditions of low cooling rate and small casting.However,cooling on the castiron surface causes the change of circular-degree and grain size of I-phases from the castiron cooling surface to the room cooling surface,and the distribution is affected remarkably by cooling rates.Five-fold icosahedral quasicrytal Zn60Mg30Y10,which appears in five petal shapes or in small pentagonal grains,is dispersed on the matrix with 10-60 μm grain size.
Source: openalex_inverted_index · Quality: baseline
Research context
OpenAlex topics: Quasicrystal Structures and Properties
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References
Reference metadata was not supplied for this record.