article·2013-01-01

Static softening behavior of Incoloy 800H and its evolution of substructure

MA Tian-jun

Abstract

For the purpose of optimizing hot working processes for Incoloy 800H,two-pass hot compression tests have been performed on MMS-300 thermo-simulation machine.The flow stress curves of two-pass compression under different deformation conditions have been plotted,and the effects of deformation temperature,strain,strain rate and initial austenite grain size on the static softening behavior have been investigated.The characteristics of substructure development in the inter-pass time have been analyzed by EBSD and TEM technique,and the recrystallization kinetic model has been established based on experimental results.The results showed that the influence of deformation temperature on the rate of static recrystallization was the most obvious.When deformation temperature was below 950 ℃,the static recrystallization was inhibited by precipitated phase of Cr23C6 at grain boundaries,which pinned the high angle grain boundary.The dominant softening mechanism was static recovery.With the increase of deformation temperature,the precipitation dissolved gradually,which decreased the pinning effect and resulted in the occurrence of static recrystallization.The static recrystallization kinetic model had a high accuracy in the prediction of recrystallization volume fraction.
Source: openalex_inverted_index · Quality: baseline

Research context

OpenAlex topics: Metallurgy and Material Forming · Metal Alloys Wear and Properties · Microstructure and Mechanical Properties of Steels

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References

Reference metadata was not supplied for this record.