Numerical simulation for the dynamic process of aluminum liquid granulation with the algorithm of coupled FEM- SPH
Source abstract
Abstract
The SPH method is introduced to simulate collision process between granulating wheel and molten steel slag because traditional method based on grid cannot effectively solve large deformation problems. The molten steel slag was replaced by aluminum liquid since some of physical parameters of molten steel slag are unclear so far. SPH method was adopted to simulate granulating process of aluminum liquid as well as FEM was used to simulate granulating wheel. Meanwhile,coupling SPH method with FEM was realized by means of the contacting algorithm. The effects of granulating wheel speed and velocity of aluminum liquid on particle size of aluminum droplet during collision process were investigated. The simulation results indicate that optimal granulating wheel speed and aluminum liquid velocity are 900 rad / min and 1 m / s when SPH particles bear quality of 2. 04 × 10- 4kg,respectively. Under this condition,the single particle volume of most aluminum droplets is in range of 1 330 ~ 1 930 mm3when particle speed after collision process is between 5 ~ 25 m / s.
Source: openalex_inverted_index · Quality: baseline
Research context
OpenAlex topics: Fluid Dynamics Simulations and Interactions · High-Velocity Impact and Material Behavior · Advanced ceramic materials synthesis
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References
Reference metadata was not supplied for this record.