Influence of extrusion temperature on microstructure and mechanical properties of self-reinforced HDPE rods
Source abstract
Abstract
Self-reinforced high density polyethylene (HDPE) rods with diameter of 7.2 mm were successful prepared at different temperatures using homemade mould. The influence of the temperature on microstructure and mechanical properties of self-reinforced HDPE rods was studied by SEM observation, WAXD analyses, DSC analyses and tensile strength measurement. The result shows that the extrusive temperature is a very important parameter affecting the structure and properties of the self-reinforced HDPE rods. With the decreasing of the extrusion temperature, the crystallite size and crystallinity of self-reinforced rods are promoted significantly, but the crystal face distance remains invariable. Melt points drift to the high temperature and there exist microfibrils in the self-reinforced rods in great bulk. The tensile strength and welding strength of the rods extruded at 130 ℃ are 220.6 MPa and 152.9 MPa respectively. They are nearly 10 times higher than those of un-reinforced samples.
Source: openalex_inverted_index · Quality: baseline
Research context
OpenAlex topics: Tribology and Wear Analysis · Fiber-reinforced polymer composites · Natural Fiber Reinforced Composites
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References
Reference metadata was not supplied for this record.